MA0403-EA

Operation Guide 1343/1794/2364

To Set Time and Date

Crown

•

The configuration of your watch

(Normal position)

may differ somewhat from that

shown in the illustration.

First click

[Setting date]

(Setting date)

1) Pull the crown out to the first

click.

2) Set the date by turning the

crown.

Avoid setting the date

between the hour of 8:00 p.m.

and 1:00 a.m. (The date

display may not change in the

Second click

following day).

(Setting time and day

3) Push the crown in to the

of the week)

normal position.

Day of

[Setting time and day of the week]

the week

Date

1) Pull the crown out to the

second click when the second

24-Hour Hand

hand is at 12 o’clock position

and the second hand stops.

[Module 1343/2364]

2) Set  the hands by turning the

crown. As you do, the day of

the week changes

Crown

accordingly.

(Normal position)

•

After setting day of the week,

carefully set the time, making

First click

sure to distinguish between AM

and PM.

(Setting date)

3) In accordance with a time

signal, push the crown in.

24-Hour Hand

The 24-Hour Hand indicates the

current hour of the day, making one

Second click

complete rotation every 24 hours.

(Setting time and day

of the week)

Day of

the week

Date

24-Hour Hand

[Module 1794]

I For watch with the elapsed time bezel

Rotate the elapsed time bezel to align the

1

0

0

5

mark with the minute hand.

After certain amount of time elapsed, read the

2

0

0

4

graduation on the elapsed time bezel which

30

the minute hand points to.

The elapsed time is indicated.

Elapsed time bezel

•

Some water resistant models are equipped

with a screw lock crown.

•

With such models, you must unscrew the

crown in the direction noted in the illustration

to loosen it before you can pull it out. Do not

pull too forcibly on such crowns.

•

Also note that such watches are not water

resistant while their crowns are  loosened.

Be sure to screw the crowns back in as far

as they will go after making any setting.

1